Friday, September 21, 2012

Jewelry Duty: Inspired by Jury Duty?



So, this last week or so I've been slow on posting....As you know, I've been cleaning my workshop.  While I was cleaning, I found a piece from the back of a broken chair that I had started painting awhile back.  I didn't know what I was going to do with it but I had an idea when I had jury duty this week.  Jury duty sort of sounds like jewelry duty....and since I like making jewelry displays; why not!

I always hang on to scraps that have an interesting shape, even if I have no idea what I'm going to do with them.

Then, when I'm painting on a project and have a little leftover paint in the pan, I'll pull out some of those scrap parts and throw some paint on them.  Sometimes, they get several layers of paint before I get an inspiration.  In this case, this old chair back had a layer of green.  Then, a little leftover wash from my  Chair-y Chair-y Quite Contrary post.




















After a little sanding, it actually became the inspiration for a lesson on How To Fix A Bad Sanding Job.
Since I haven't written that post yet, here it is:







 Here's what happened:  I use a palm sander.  When you're sanding off paint, it gets clogged up on the sandpaper (at least this is my theory on why this happens).  Anyway, you start getting this unattractive skipping pattern; not good.

The fix is to take a little sandpaper and hand-sand those areas smooth.

You could always go back with more paint if you don't want that much exposed wood.  But, since I didn't know what this project would turn into, I decided to leave it as it was and this is what I was left with.


Then, I just finish it with a little Fiddes Supreme Wax in Rugger Brown.

So, now we're to my week of jury duty.  On day two, I was called to a trial and "excused for cause" so I got to go home early and work in my "sort of cleaned-up" workshop.  After all, I deserve to have a little fun before I have to get back to the cleaning....right?

I always thought this chair back reminded me of one of those framed silhouettes and it really needed to be mounted on something and framed.



I found an old frame that was the right size and a piece of old recycled backer board that was "almost the right size"....yeah!  an excuse to use the table saw:)

 I could paint the backer board but I liked the idea of a pattern so I found this leftover wallpaper from my mother-in-law that I had been holding onto.  The bit of green was just the right color for my chair back.



When I ran out of Cam Tack on my last project, I decided to try this 3M product called Super 77 I found on one of my many trips to OSH.
It worked similar to the Cam Tack and was perfect to adhere the vinyl wallpaper to the backer board.

The frame I found had been shuffled around the workshop for awhile so it was pretty banged up.














A little sanding with a medium grit sanding sponge gave the frame a nice even distressing.



 The rustic brown frame is going to balance the exposed wood on the chair back nicely so I decide to just use the same wax on the frame for a quick finish.

It's a quick brush on....

...and wipe off.

This is so easy;  all I have to do is give it a quick buff with a clean cloth and it's ready to go all shiny and new.

Now, it's time for assembly.

This is where clamps come in handy...what did I ever do without them?












Once I get the silhouette centered and clamped, I screw it on from the back side making sure to use a short enough screw that it won't pop through the front.

Now I need to mount the backer board into the frame.  This is when I wish I were a professional picture framer and knew all their tricks.

After taking the broken glass out of so many old windows, I decided glazing points would be a sturdy way to mount backer board for things like chalkboards and bulletin boards so I decide to use them here as well.

 I'm not even sure if this is how you're supposed to install glazing points because I've never worked in a glass shop either, but it seems to work okay.  I take a large screwdriver and just push the glazing point into the frame.  Then I use a tack hammer and just tap it the rest of the way in.


After that, I hammer the ends down flat.






I approach this like I do an upholstery project; start with one glazing point in the center of each of the four sides.  Then, I add one about an inch or so from each corner.  That's enough for the short ends but then I add more to the long sides between the center and the corner.  This should hold everything together just fine.


If I were a professional framer, I'd have some nice brown paper to glue to the back to make it look pretty, but I'm not, and I don't, so I'll just use a little masking tape to cover all the things that might scratch a wall.



 Next, I want to add the hanging hardware to the back.  While this is normally a last step, for this project I need to do everything that goes on the back first because I'm going to use cup hooks on the front that stick out so I don't want to have to work on the back after I have all those attached.

When I'm making something that's going to hang on the wall and needs to be sturdy, I like to use two D rings.  You buy them according to the weight of whatever you're hanging.  The small one would probably be fine for this project but I only had one small ring so I'm using two large ones instead.

I usually mount the D rings 4-6 inches from the top of the frame.  For a frame this thin, I decide to use only the bottom screw hole so that the D ring can be turned into the frame so that when it's hung on the wall it won't show from the side of the frame.

I need something to hang the jewelry on, so  I use brass cup hooks.  You used to be able to find real brass cup hooks that would age to a nice patina.  The new ones are really shiny and a cheap metal that may or may not really be brass.  You can leave them that way if you like, but I like a more rustic look so I use a little rust activator and get the aging process going.  This could take a couple of days so don't wait until the last minute.

After they've rusted, be sure to spray several coats of sealer on the hooks since you are going to be hanging your jewelry on them.  Although I've never had any problem, if you feel you may have any metal sensitivities, please use your own discretion.
 I'm going to do two rows of hooks offset by half an inch.  I used a ruler lined up along the bottom edge of the top of the chair silhouette and made a mark with an awl an inch apart.


 Then, I lined the ruler along my awl marks and made a new mark a half inch to each side of my bottom mark.
 It's important to pre drill all your holes before trying to screw in the cup hooks.  Choose the right size drill bit and make a mark with blue tape to the depth you want to drill your hole.  If you drill it too deep, it won't be strong enough and if you don't drill it deep enough, you make risk breaking off the cup hook as you're trying to screw it down tight.

The two rows at the top can hold lots of necklaces and I added a row at the bottom that would work well for earrings, rings or bracelets.

And there you have it...ready for jewelry duty!


P.S.  For those people who have said they wish they could spend a day in my head....this one's for you....

So, as I was playing with the title Jewelry Duty/Jury Duty, I had a lightbulb moment...the chair back silhouette looked like the scales of justice without the scales.  I had just the thing!  I've been hanging onto this cut glass dish that I had broken...almost in half.  What perfect scale dishes!  A couple of eye hooks and some old rusty chain and I think it looks like the scales of justice?!?

Okay, so I had to stop myself....although the dishes would be great for rings and bracelets, I wasn't sure I would be able to attach the bowls to the backer board that was already covered in wallpaper and have it be solid enough to hold any weight.  I didn't want to risk messing up my finished project. :(


I've been invited to speak at a ladies luncheon in Salinas tomorrow and I'll be taking this project with me for show and tell.  If it makes it back with me, I will post it for sale on Sunday.

Overall dimension:  17 1/2" x 21 1/2"

$42






I just checked out Funky Junk Interior's Friday Night Link Party.  This weekend it's all about table runners.  I linked this Jewelry Duty post under the Home Decor category but hope to think up some clever table runner to add to the Themed Party before time runs out!  You should check it out for some great ideas.  She has the best blog!....something to aspire to....




6 comments:

  1. I absolutely adore the DIY style you pronounce with this post, it just screams luxury CHEAP! I honestly want to steal that right from your house!!

    -Solomon Berkovitch

    ReplyDelete
    Replies
    1. Thank you, Solomon for your enthusiasm...who knows you may be able to purchase it on Sunday. Hope you'll keep tuning in.

      Delete
  2. Wonderful aгticle! Τhаt is the tуpe of info that are suppοsed tо be shaгeԁ around thе web.
    Shame on the seаrch engines for not ρositionіng thіs submit uρpеr!
    Cоmе on ovеr аnd conѕult wіth my ѕite .

    Τhаnkѕ =)

    Also viѕit my blοg post: build a healthy brain
    Feel free to visit my website ... understanding nootropics

    ReplyDelete
    Replies
    1. Thank you for your comment. I do hope you'll share with your friends and check back for future posts.

      Delete
  3. Hі this is kinda оf off topiс but
    I was ωondering if blogs use WYSIWYG editoгs or if you have to manuallу cоde with ΗTML.
    I'm starting a blog soon but have no coding know-how so I wanted to get guidance from someone with experience. Any help would be greatly appreciated!

    my blog :: first time big green egg instructions
    My website how to use the digiq

    ReplyDelete
  4. This comment has been removed by a blog administrator.

    ReplyDelete

Post A Comment